NYSEMKT: UQM December 12, 2017 5:00 PM CET Minimum 20 min delay
+0.00 +0%
Volume: 135,900

UQM has a TS16949 certified, state-of-the-art manufacturing facility with significant capacity to support high volume manufacturing and a variety of product lines.

USA Manufacturing Facility

UQM’s 130,000 Sq. Ft. facility is located in Longmont, Colorado. All modeling, simulation, development, manufacturing and testing will occur at this location. UQM is leveraging its decades of vehicle electrification experience, resulting in deep technical expertise, proprietary adaptive software and an evolved product lineup.

Overview

  • 130,000 Sq. Ft. Manufacturing Plant With Significant Capacity to Support OEM High Volume Manufacturing
  • Headquarters, Engineering and Manufacturing Operations
  • 130,000 Sq. Ft. facility in Colorado
  • High Volume Capacity to Support OEM Requirements
  • ISO 9001 and TS 16949 Certified
  • ISO 14001 Certified
  • Stator Winding, Magnetizer, Rotor Assembly, Controller Assembly
  • Test Capability
  • Manufacturing Cellular Approach
  • Lessons Incorporated from UQM and Prior Multinational Experience in Hybrid and Electric Drive Operations
  • Fully Qualified Global Supply Base
  • Supply Management System to Support High Volume Cost Competitiveness
  • PCBs, Magnets, Laminations, Modules, Mechanical and Electrical Components
  • On-Site Machining Capability For Low Volume and Quick-Turn Prototypes
  • Experienced Manufacturing, Engineering, and Quality Team To Support Volume Production

Read more

UQM’s 130,000 Sq. Ft. facility is located in Longmont, Colorado. All modeling, simulation, development, manufacturing and testing will occur at this location. UQM is leveraging its decades of vehicle electrification experience, resulting in deep technical expertise, proprietary adaptive software and an evolved product lineup.

UQM has over 40 years’ experience in the automotive industry. Our engineering research, innovation, expertise and product direction provides cutting edge solutions for propelling the next generation of electric, hybrid, plug-in hybrid, fuel cell and extended range vehicles. Our engineering team includes electrical engineers, power electronic engineers, software engineers, mechanical engineers, manufacturing engineers, quality engineers, designers, and technicians, all of whom collaborate to create world class products for advanced vehicles.

UQM designed and is manufacturing the PowerPhase® Pro family of products for the automotive marketplace. They are PPAP qualified and validated by several major automotive OEMs. UQMalso produces a system solution for the truck and bus markets, targeting parameters to meet the requirements of these markets, with the PowerPhase® HD family of products. Like the automotive system, the system is based on brushless permanent magnet motor and three-phase IGBT drive technology.

UQM’s power laboratory has resources in place to accommodate the testing of motors, generators, and controller electronics. Four separate dynamometer setups are capable of testing systems from fractional horsepower wheelchair motors to 250 kW motors and generators for large electrified vehicles. The largest dynamometer is capable of testing systems rated for up to 300 kW of output power. Two dynamometers use high accuracy torque transducers, the HBM T12, which has an accuracy of 0.01% relative to its full scale torque rating. Combined with other precision measurements, these test cells are used to generate accurate efficiency and heat rejection maps of UQM systems. In addition to dynamometers, UQM has on-site thermal chambers, providing the ability to operate systems at extreme temperatures.

IR Contact

investor@uqm.com

303.682.4900

UQM Technologies Inc
4120 Specialty Pl.
Longmont, Colorado 80504

Email Alerts

Email Address *

 
Enter the code shown above.

contact

sales@uqm.com

303.682.4900

UQM Technologies Inc
4120 Specialty Pl.
Longmont, Colorado 80504